Is the Operation of Laser Cutting Machine Complicated?

Users will have an instruction manual when they buy anything operational. It's certainly no exception for such a large and expensive piece of equipment as a laser cutting machine. The first thing the user can do is to read the instruction manual carefully.

In addition to the technical engineers of the equipment manufacturer who will come to the customer site to conduct operation training of the laser cutting machine, users also need to practice the operation and use time accumulation to digest the content of the manual.

After long-term accumulation of experience, senior technicians in the laser cutting industry have summarized the following basic operation guides for the reference of novice users:

1. Fix the cutting material. Fix the material to be cut on the working surface of the laser cutting machine;

2. According to the material and thickness of the metal plate, adjust the equipment parameters of the laser cutting machine accordingly;

3. Select the appropriate lens and nozzle, and check their integrity and cleanliness before starting the laser cutting machine;

4. Adjust the focal length of the laser cutting machine and adjust the cutting head to the appropriate focus position;

5. Check the laser cutting machine and adjust the nozzle to center it;

6. Calibrate the cutting head sensor of the laser cutting machine;

7. Select the appropriate cutting gas for the laser cutting machine and check whether it is in good condition;

8. Tries to cut the material with the laser cutting machine . After cutting the material, check whether the cutting section is smooth and check the cutting accuracy. If there is any error, please adjust the parameters of the laser cutting machine equipment accordingly until it is proved to meet the requirements;

9. Compile the workpiece drawings and make the corresponding layout, and import them into the cutting system of the laser cutting machine equipment;

10. Adjust the position of the cutting head of the laser cutting machine and then start cutting;

11. During the operation of the laser cutting machine, the staff must be at the entire site and carefully observe the cutting situation. If an emergency occurs and a quick response is required. Press the emergency stop button;

12. Check the cutting quality and accuracy of the first sample of the laser cutting machine;

13. Pay attention to check the auxiliary gas and its pressure of the laser cutting machine. If the gas is insufficient, it needs to be replaced in time.

The above operation steps of the laser cutting machine may have great reference value for new users, but the specific operation of the laser cutting machine should be adjusted according to the actual situation. We hope that most users buy them, operate them, and use them to create more and greater value for their businesses.